arbhar

Plug the USB stick of an Instruō arbhar into your Mac and Arkidome takes it as an arbhar stick. There is nothing to switch on: the library appears while the stick is plugged in and goes away with it. Arkidome is not made by or affiliated with Instruō. For what every device gets, see Hardware.

What the module needs

Sample format 24-bit, 48 kHz WAV, mono or stereo (the manual's sample pack is stereo)
Library The _arbhar_library folder, holding 36 fixed locations, 1_1_sample to 6_6_sample
Length 13 seconds per location
Cue sets None; the app writes plain WAV files
Names Up to 24 letters, digits, spaces, -, _ and #
Stick USB flash drive; the manual names no file system, so any is accepted

The manual calls the location's first number the bank and the second its layer. Arkidome keeps its own words: the library is a pool of 36 folders, and each folder is one location. The module loads the first 13 seconds of the file in the location you choose, so longer samples are cut. Samples at other rates are converted by the module at load, but they load more slowly, so Arkidome writes 48 kHz.

Browse the stick

A stick is the arbhar's when it holds _arbhar_library or _arbhar_scenes at the top. The _arbhar_library_2 to _arbhar_library_6 folders and the _updater folder are the module's own; they are never read or written. Scenes are not managed yet, so an existing _arbhar_scenes folder and its configuration files are left exactly as they are.

The sidebar's Library row opens to the 36 locations, in the module's order. A location without a sample still shows, with 0 samples, so you can see which places are free.

Set up a blank stick

Right-click the stick in the sidebar's Drives section, choose Set Up for Device and then Instruō arbhar. Arkidome makes the _arbhar_library folder and its 36 locations. It creates folders only: existing folders, samples, scenes and configuration files are never touched, moved or replaced. A file where a folder is needed stops the set-up with a plain message, and nothing is left half made.

Send samples

Send to arbhar… (right-click menu, the drum machine, or the stick) asks which location to fill, then writes one sample:

_arbhar_library/
  1_1_sample/
    # Kick.wav
  1_2_sample/
  2_1_sample/
  …
  6_6_sample/

A location holds one sample. The sheet says so and refuses a second one until you move the first out. Samples are written at 24-bit 48 kHz, a mono sample stays mono and a stereo sample stays stereo, with trims and sound edits applied and levels matched as on every device. A name keeps the leading # the module's factory pack uses.

There are no banks, no sets, no Joined files and no collection send in one go, because the module does not read cue points and the app has no way to choose among 36 fixed locations for a collection. Send the sounds one at a time.

The module reads the stick when you choose a location, so eject it safely before taking it out. Whether a sent sample loads as expected on the hardware has not been verified.