Octatrack

Plug the Compact Flash card of an Elektron Octatrack into a card reader, or put the unit into USB DISK MODE, and Arkidome takes it as an Octatrack card (MKI and MKII alike). There is nothing to set up: the card's sets appear while it is plugged in and go away with it. Arkidome is not made by or affiliated with Elektron. For what every device gets, see Hardware.

What the unit needs

Sample format 16-bit, 44.1 kHz WAV, mono or stereo
Sets Folders at the top of the card, each with its own AUDIO folder
Audio Pool Up to 1024 files or folders in each folder of AUDIO
Cue sets None; the app writes plain WAV files
Names Up to 24 letters, digits, spaces, - and _ (the manual gives no limit, so Arkidome cuts names at 24 characters)
Card Compact Flash, FAT16 or FAT32

The manual also accepts 24-bit files and AIFF. Arkidome writes 16-bit WAV, the smaller of the two formats, and keeps a mono sample mono and a stereo sample stereo. There is no length limit: the Octatrack's Static machines stream a file from the card. Slice and loop points are not written; the manual does not document the .ot file that holds them, so slices are made on the unit.

Browse the card

Arkidome takes a card for the Octatrack when at least one folder at the top of the card holds an AUDIO folder. A firmware .bin in the root is not a marker, and a card with another device's marker stays that device's. The factory set is called PRESETS; a set with that name is still the Octatrack's.

The sidebar shows one row per set, under Drives. Expanding a set lists the folders inside its AUDIO folder, and the main list groups that set's samples under those folders. Only AUDIO is read: a set's project folders, and their .strd and .work files, are never opened, listed or changed.

Send samples

Send to Octatrack… (right-click menu, the drum machine, or the card) asks which set and which folder of its Audio Pool, then writes 16-bit 44.1 kHz WAV files named as you type:

PRESETS/
  AUDIO/
    Drums/
      Kick 808.wav
    Breaks/
      707/
        Amen.wav
  PROJECT/
    PROJECT.strd            ← never touched
    PROJECT.work            ← never touched

A mono sample stays mono and a stereo sample stays stereo. The sheet's Match levels switch, on by default, brings the samples to a similar loudness. Existing files are never replaced silently: a new name takes a number instead. A folder that already holds 1024 files or folders is refused.

A collection without sub-collections becomes a folder in the chosen set's Audio Pool, named after the collection. Collections with sub-collections need banks, which the Octatrack does not use, so the sheet explains and sends nothing.

Normalize All Samples… is not offered for this card: it would have to change files in the project folders, and Arkidome only writes inside each set's AUDIO folder.

The card is read when the unit starts or mounts a set, so eject it safely and mount the set again to see new samples. Whether a sent sample shows up as expected on the hardware has not been verified.