Morphagene

Plug in the microSD card of a Make Noise Morphagene and Arkidome takes it as one for the module. There is nothing to set up: its features appear while the card is plugged in and go away with it. Arkidome is not made by or affiliated with Make Noise. For what every device gets, see Hardware.

What the module needs

Sample format WAV, 48 kHz, 32-bit float, stereo only; Arkidome writes exactly that
Reels Up to 32 on a card, each up to 2.9 minutes (174 seconds), which is where longer samples are cut
Card FAT32 microSD, with the reels as files in the top of the card: mg1.wav to mg9.wav, then mga.wav to mgw.wav
Names The files are named by their reel, so a sample's own name is not kept on the card
Not on this module Sets, a Pool, bank names, and joined files with cue sets. The splice markers the module keeps in a reel are not read or written

How the card is recognized

The module's card has no folder with its own name. Arkidome takes a drive for a Morphagene card when the top of it holds a file named like a reel. A card that is blank, because the module has not recorded anything on it yet, is not recognized by what it holds. Right-click it under Drives in the sidebar and choose Set Up for Device > Make Noise Morphagene: Arkidome writes nothing to the card, no file and no folder, and only remembers the card as a Morphagene card. That memory lasts until Arkidome quits, so after a restart a blank card is a plain drive again. Once you have sent a first reel, the reel itself makes the card recognized. A different drive that happens to hold a file named like a reel would be taken for a Morphagene card too.

Browse the card

The card appears in the sidebar as one bank of 32 channels, one for each reel. Hear a reel, drag it out or try it in the drum machine. Right-click a reel to take it out of its channel. The bank is the card itself, so it cannot be renamed, copied, moved or deleted. Samples on the card are never added to your library.

Send samples

Send to Morphagene… (right-click menu, the drum machine, or the card) writes samples as reels, into the lowest free channels or the ones you pick. They are brought to the same loudness, so they play at similar volumes (the sheet's Match levels switch turns that off), and written as 48 kHz 32-bit float stereo WAV. A mono sample plays from both sides. Trims and sound edits are applied.

The module saves to its card all the time. Take the card out of the module before you send, and put it back when the send is done. Nothing is overwritten silently, and an old reel is only replaced once the new file is written and checked. Exact behavior on the hardware has not been verified.