Radio Music

Put the microSD card of a Music Thing Modular Radio Music in a card reader and Arkidome takes it as a Radio Music card. There is nothing to switch on: the card's banks appear while it is plugged in and go away with it. Arkidome is not made by or affiliated with Music Thing Modular. For what every device gets, see Hardware.

What the module needs

Sample format WAV, 16-bit or 24-bit, mono or stereo at any rate, up to 96 kHz
What Arkidome writes 16-bit, 44.1 kHz mono WAV
Banks Folders 00 to 15 at the top of the card
Files Up to 250 audio files in a bank, up to 800 on the card
Order The module plays the files in a bank alphabetically
Cue sets None; the app writes plain WAV files
Names Up to 24 letters, digits, spaces, - and _
Card SDHC to 32 GB as FAT32 or SDXC as exFAT

The module calls one file a station. Arkidome keeps its own word, bank, and one bank is one folder. The module also reads AIFF and the older .raw files; Arkidome lists both and writes only .wav. A stereo file plays its left channel on the module, so Arkidome mixes a stereo sample to mono rather than leaving a channel the module ignores.

Browse the card

A card is the Radio Music's when its top holds settings.txt, the module's own settings file that it writes on first use. A card with another device's marker stays that device's. The sidebar shows banks 00 to 15; opening one lists its files in the order the module plays them. An empty bank still shows, so you can see which numbers are free.

A bank that holds a subfolder (the module's own next or random folders) is shown but not added to or replaced: those folders are not managed yet, and changing the bank would risk them. settings.txt is never listed as a sample.

Set up a blank card

Right-click the card in the sidebar's Drives section, choose Set Up for Device and then Music Thing Modular Radio Music. Arkidome writes settings.txt with a single comment line and nothing else: the module reads the rest of its settings from the file's defaults, and an existing settings.txt is never replaced. No folder is made; the first bank is made when you send samples to it.

Send samples

Send to Radio Music… (right-click menu, the drum machine, or the card) asks which bank to fill, then writes the samples with their own names:

00/
  Kick 808.wav
  Snare tight.wav
15/
  Tanpura.wav
settings.txt

Each sample becomes 16-bit 44.1 kHz mono WAV, with trims and sound edits applied and levels matched as on every device. The file keeps its name, so the module plays it where the alphabet puts it; the sheet says so. A leading _ is dropped because the module ignores such files, and names are cut at 24 characters. Names with the same sound get a number instead of replacing the first file.

A bank holds 250 files and a card 800; a send that would pass either limit is refused and says how many fit. Replace replaces only the bank's audio files, so a settings.txt or another file in the bank stays as it is.

There are no sets, no pool, no bank names and no Joined files, because the module does not read cue points. A whole collection cannot be sent in one go yet; send its sounds a bank at a time.

The module reads the card when it starts or the card is inserted, so eject it safely before taking it out. Whether a sent sample plays as expected on the hardware has not been verified.