ER-301

Send samples to the microSD card of an Orthogonal Devices ER-301 Sound Computer. Put the card in a reader and Arkidome takes it as an ER-301 card. Arkidome is not made by or affiliated with Orthogonal Devices. For what every device gets, see Hardware.

What the module needs

Sample format WAV, mono or stereo, any bit depth and sample rate; Arkidome copies the file as it is instead of converting it
Folders Folders inside ER-301/samples; up to 65,535 entries in each and eight levels deep (the documents give no limits, so these are the app's)
Names Up to 24 letters, digits, spaces, - and _ (the module shortens its own display to 22 characters, so the app cuts names at 24)
Card microSD, FAT32 or exFAT
The module's own folders logs, tmp, recorded, packages and the firmware folders in ER-301 are not samples and are never read, listed or written
Not on this module Banks, sets and joined files with cue sets

The module loads a sample into its Sample Pool at the card's own bit depth and sample rate, and turns it into 32-bit float in memory. It runs at 48 kHz (or 96 kHz), so it resamples a 44.1 kHz file as it plays; Arkidome leaves the file untouched rather than choose a rate for you. There is no sample length limit, but the module loads about 480 MB into memory, so a very large pool may not all play at once.

How the card is recognized

Every card the module has mounted holds an ER-301 folder at the top, so a drive with that folder is taken for the ER-301. A file named ER-301 is not enough, and a drive with an ALM022 folder is always the Squid's. To make a blank card the module's, right-click it in the sidebar's Drives section, choose Set Up for Device and then ER-301: Arkidome makes ER-301 and ER-301/samples, and changes nothing that is already there.

ER-301/samples, not ER-301, is the folder Arkidome reads and writes. The rest of ER-301 belongs to the module, including its recordings in ER-301/recorded; because Normalize All Samples… only walks the app's own folder, it can never change the module's recordings.

Browse the card

The card appears in the sidebar as the Sample Pool, listing the folders inside ER-301/samples. Hear a sample, drag it out or try it in the drum machine. Right-click a folder to reveal it or move it to the Trash. Samples on the card are never added to your library.

Send samples

Send to ER-301… writes the samples into a folder of the Sample Pool that you pick or name; there is no choice without a folder, because the pool is the top of the app's folder and the module reads folders, not loose files. The samples are copied as they are: a WAV keeps its bit depth, sample rate and channels. Only a sample with a trim or a sound edit is written as a new WAV, at its own bit depth and sample rate. A FLAC or AIFF sample becomes a WAV file the same way. There is no length limit, and the sheet's Match levels switch, on by default, brings the samples to a similar loudness. Nothing is overwritten: a file that is already there is never replaced, and a new one takes a number instead. A folder that already holds 65,535 files or folders is refused.

ER-301/
  samples/
    Drums/
      Kick 808.wav
    Breaks/
      707/
        Amen.wav
  recorded/                 ← the module's own, never touched
  logs/                     ← the module's own, never touched

The module's file browser starts at the top of the card, so navigate to ER-301/samples to load what you sent. The module records to its card as it runs, so take the card out of the module first, with the STORAGE switch in eject and the safe light on, and put it back when the send is done. A card is FAT32 or exFAT.

The module reads a WAV's cue points as slice starts. This version of Arkidome does not make joined files for the ER-301, so the Joined arrangement and the join preset are not offered; a cue-pointed WAV you copy into the pool still works, and the module keeps its own slice sidecar files beside it untouched.

Whether a sent sample shows up as expected on the hardware has not been verified.