Rample

Put the microSD card of a Squarp Instruments Rample in a card reader and Arkidome takes it as a Rample card. The Rample MK1 and Rample Turbo run the same firmware and read the same cards, so one page serves both. There is nothing to switch on: the kits appear while the card is plugged in and go away with it. Arkidome is not made by or affiliated with Squarp Instruments. For what every device gets, see Hardware.

What the module needs

Sample format WAV, mono, 16-bit or 8-bit, 44.1 kHz
Kit folders One letter A to Z and a number 0 to 99 at the top of the card, A0 to Z99 (2600 kits)
Voices Four per kit; the first character of every WAV is the voice, 1 to 4
Layers Up to 12 WAVs may share one voice; Arkidome sends one per voice in this version
Length At least 50 milliseconds; no maximum
Cue sets None; the app writes plain WAV files
Names Up to 24 letters, digits, spaces, - and _ after the voice digit
Card microSD; the manual names no file system

The manual calls a folder a kit and a sample's place in it a voice. Arkidome uses kit for the bank and voice for the channel, and keeps its own word bank in the rest of the app. A kit must hold a voice 1 sample or the module will not open it.

Browse the card

A card is the Rample's when at least one kit folder at the top holds a voice 1 WAV. There is no marker file, so a very unusual card of the same shape would be taken for a Rample card too; a card that carries another device's marker stays that device's. The firmware rample.bin and notes at the top are ignored and never touched.

The sidebar and the main list show Kit A0 to Kit Z99, each with four voices. A kit that holds several layers on one voice shows that voice as filled; nothing is lost by listing it once.

Set up a blank card

Right-click the card in the sidebar's Drives section, choose Set Up for Device and then Squarp Instruments Rample. Arkidome writes nothing: the module needs no file or folder, so a blank card is only remembered for this session. The first kit you send makes the card recognizable by itself.

Send samples

Send to Rample… (right-click menu, the drum machine, or the card) asks for the kit folder, A0 to Z99, then writes one sample per voice:

A0/
  1 Kick.wav
  2 Snare.wav
  3 Hat.wav
  4 Bass.wav
A1/
  ...

The first character is the voice; the rest is the sample's own name. Samples are mono 16-bit 44.1 kHz WAV, with trims and sound edits applied and levels matched as on every device. There is no length limit. A kit is made with its first sample, and a send that would leave voice 1 empty is refused because the module would not open it.

Replacing a voice replaces every layer on it, so the sheet warns that all layers of that voice go; the old files are swapped out only after the new one is written and checked. A collection cannot be sent in one go yet; send its sounds one kit at a time.

The module stores its settings and the last kit on the card as it runs, so take the card out of the module first and put it back when the app is done. Whether a sent kit opens as expected on the hardware has not been verified.